Output Sel; Downcon Setting - Panasonic AJ-HPX3000 Menu Information

OUTPUT SEL

Items/ Adjustable
Data Saved Range
OUTPUT ITEM MENU ONLY
TC
STATUS
– C U F –
VBS
MONITOR
OUT
VF
Y
– C U F –
MONITOR ON
OUT CHAR OFF
– C U F –
LCD MON ON
CHAR OFF
– C U F –
MEM
VF MODE
CAM
– C U F –
THUMBNAIL ON
OFF
OUT
– C U F –
162 Menu : Menu Description Tables
Remarks
Set the character contents
superimposed onto the output signals
for the VIDEO OUT connector (Analog
or SDI) and MON OUT connector.
MENU ONLY:
Displays only when the menu
characters are superimposed. No
display appears when other characters
are superimposed.
TC:Display the time code. (Displays the
menu when menu characters are
superimposed.)
Note
The TC display position moves up
and down depending on the camera
ID position.
STATUS:
Display the same characters
superimposed on the VF signal.
(Displays the menu when menu
characters are superimposed.)
Select the output signal on the MON OUT
connector.
VBS: Output a regular composite signal.
VF: Output a VF Y signal. The status
display is also superimposed.
Y: Output a component Y signal.
Note
The VBS signal is output in playback
mode.
Select whether or not to superimpose
characters on the MON OUT connector
signal independently of the camera's
VIDEO OUT CHARACTER switch. (The
character content is the same as the
video output signal.)
ON: Enable superimpose.
OFF: Disable superimpose.
Select whether or not to superimpose
characters on the LCD monitor. (The
character content is the same as the
video output signal.)
ON: Enable superimpose.
(Not interlocked with the VIDEO
OUT CHARACTER switch.)
OFF: Disable superimpose.
(Not interlocked with the VIDEO
OUT CHARACTER switch.)
When the REC SIGNAL menu option on
the SYSTEM MODE screen is set to
CAM, select the image to display in the
viewfinder.
MEM:Display the playback image in the
playback mode.
CAM: Always display the camera image.
Select whether or not to output clip
thumbnails displayed on the LCD
monitor to the video output and monitor
output signals.
ON: Enable output.
OFF: Disable output.
Note
HD SDI signals are being output from
the VIDEO OUT connector, thumbnails
are not output.

DOWNCON SETTING

Items/ Adjustable
Data Saved Range
DOWNCON SQUEEZ For setting the mode of the down
converter output signals.
MODE LT-BOX
S-CROP
– C U F R
DETAIL ON For setting the detail function for the
OFF down converter output signals ON/OFF.
The down converter output signals
contain detailed components that are
set during HD signal processing. In this
setting, these signals overlap the
detailed components dedicated to the
down converter outputs.
Even if this setting is turned off, it is
impossible to turn off the detailed
components set during HD signal
processing.
– C U F R
H.DTL LEVEL 00 For setting the horizontal detail
correction level for the down converter
08
output signals.
31
– C U F R
V.DTL LEVEL 00 For setting the vertical detail correction
level for the down converter output
04
signals.
– C U F R 31
For setting the noise elimination level of
DTL CORING 00
01 the details.
:
15
– C U F R
H.DTL FREQ. 1 For selecting the horizontal detail
frequencies.
3
1: 2.5 MHz 4: 4 MHz
2: 3 MHz
5
3: 3.5 MHz
– C U F R
For setting the 2-D low path filter
2D LPF ON
OFF reducing cross colors.
ON: Cross colors are reduced.
OFF: Cross colors are not reduced.
– C U F R
SETUP 0% For setting the setup level for the down
converter output signals.
7.5%
Only for 1080-59.94i
Note
When the system frequency is set to 50
Hz, the setup level will be 0%.
– C U F R
Note
The <DOWNCON SETTING> screen is displayed when
SYSTEM MODE is set to 1080-59.94i, 1080-50i (HD
mode).
The ____ in the Adjustable Range column indicates the
preset mode.
Remarks
5: 4.5 MHz