Output Sel; Lcd Monitor - Panasonic AJ-SPX800P Operating Instructions Manual

8-2-5 OUTPUT SEL

Items/ Adjustable
Data Saved Range
VIDEO OUT VBS Select the output signal on the VIDEO OUT
terminal.
SEL VF
VBS: Output a regular composite signal.
Y
VF: Output a VF Y signal. The status
SDI
Y:
SDI: Output an SDI signal. Only selectable
– C U F –
OUTPUT CHAR TC Set the character contents superimposed
STATUS onto the output signals for the VIDEO OUT
terminal (Analog or SDI) and MON OUT
MENU
terminal.
ONLY
TC: Display the time code. (Displays the
<Note>
The TC display position moves up and down
depending on the camera ID position.
STATUS:
Display the same characters
superimposed on the VF signal. (Displays
the menu when menu characters are
superimposed.)
MENU ONLY:
Displays only when the menu characters
are superimposed. No display appears
when other characters are superimposed.
– C U F –
MONITOR OUT ON Select whether or not to superimpose
characters on the MON OUT terminal signal
CHAR OFF
independently of the camera's VIDEO OUT
CHARACTER switch. (The character
content is the same as the video output
signal.)
ON: Enable superimpose.
OFF: Disable superimpose.
– C U F –
LCD MON ON Select whether or not to superimpose
characters on the LCD monitor. (The
CHAR OFF
character content is the same as the video
output signal.)
ON: Enable superimpose.
OFF: Disable superimpose.
– C U F –
VF MODE EE/PB Select the image to display in the viewfinder.
EE/PB: Display the playback image in the
EE
EE:
– C U F –
THUMBNAIL ON Select whether or not to output clip
thumbnails displayed on the LCD monitor to
OUT OFF
the video output and monitor output signals.
ON: Enable output.
OFF: Disable output.
– C U F –
102
Remarks
display is also superimposed.
Output a component Y signal.
when the optional AJ-YA902AG
extension board is attached.
menu when menu characters are
superimposed.)
(Not interlocked with the VIDEO OUT
CHARACTER switch.)
(Not interlocked with the VIDEO OUT
CHARACTER switch.)
playback mode.
Always display the camera image.

8-2-6 LCD MONITOR

Items/ Adjustable
Data Saved Range
BRIGHTNESS –7 Adjust the LCD monitor brightness.
:
+0
:
– C U F – +7
COLOR LEVEL –7 Adjust the LCD monitor chroma level.
:
+0
:
– C U F – +7
CONTRAST –7 Adjust the LCD monitor contrast.
:
+0
:
– C U F – +7
BACKLIGHT HIGH Select whether or not to set the LCD monitor
brightness to always high.
NORMAL
HIGH:
NORMAL: The brightness changes
– C U F –
SELF SHOOT NORMAL Select whether or not to change the LCD
MIRROR monitor to mirror image.
NORMAL: Do not change to mirror image.
MIRROR:
– C U F –
ASPECT CONV. LT.BOX Select a screen ratio for images displayed
on the LCD monitor.
SQUEEZE
LT.BOX: Display images in the letter box
SQEEZE: Display images in the squeeze size.
<Note>
This item is enabled only when ASPECT
described in "8-2-1 SYSTEM MODE" is set
– C U F –
to16:9.
The ____ in the Adjustable Range column indicates the preset
mode.
Remarks
Set to always high.
according to the BRIGHTNESS
setting.
Change to mirror image.
size.