Private Line - Comdial DX-80 Installation & Maintenance Manual

¢£¤¥
•
Use to highlight "CO Line" and then press
¢£¤¥
•
Use to highlight "Category 2" and then press
¢£¤¥
•
Use to highlight "Privacy Release" for the CO Line to be changed.
«
•
Press until the appropriate setting displays.
•
Continue making other programming changes as required.
•
When all changes are made press the
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Private Line

The Private Line assignment provides a quick and secure method of programming one or more CO Lines for access
by only one extension. If the associated Private CO Line appears (on a feature button) at other extensions, the button
will light when busy but the line cannot be accessed from Hold, answered on incoming calls, or used for outgoing
access. The Private Line is used exclusively by the extension that is assigned the "Private To" extension in Database
Programming.
Related Features
CO Line Assignment
CO Line Receive Assignment
Related Programming
CO Line - Private To
Conditions
a) Incoming calls signaling on a private CO line will ring its associated extension regardless of whether the CO
line ring assignment is allowed in programming. Private Line programming will override CO Line – Answer
Position and CO Line Receive Assignments for that extension.
b) CO Lines designated as Private To, will follow call forward modes as set by the Private To extension.
Default Settings
CO Line – Private To is set to "NULL" (none) for all CO lines. (Range is Null/any extension number.)
Programming Abstract
Program the CO Lines required for private operation to the designated extension via the "Private To" setting.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
°
(escape) key to exit this database-programming screen. You will
3-202
M
ANUAL
«
.
«
.
CO Line Ring Assignment