Headset Jack; Headset Mode - Comdial DX-80 Installation & Maintenance Manual

Related Features
Intercom Mode Selection
Operation
1. Establish an intercom call to an extension in Voice Announce mode (Hands-free or Private). Your telephone
will display:
*
2. Press to change the alert signal at the called extension from Voice Announce to Tone Ringing. Your
telephone will display:
3. A Tone Ringing alert signal is sent and continues at the called extension until answered.
4. If your call remains unanswered, you may dial
Analog Ports (Single Line Telephones)
*
Dial to tone ring an extension in Voice Announce mode.
Conditions
a) It is not possible to force an extension from Tone Ring mode to Voice Announce mode if Tone Ring is the
mode they have selected.
b) If you want to leave a Callback request at a called extension that doesn't answer, the alert signal must be
set for Tone Ringing.

Headset Jack

All Digital Speakerphones have a standard 2.5 millimeter headset jack. This headset jack facilitates industry-standard
headset equipped with this jack type. Headset jack adapters are often available from headset manufacturers to adapt
your headset to the 2.5 mm jack.
A headset connected to the headset jack can be operated as an integral component of the DX-80 digital
speakerphone. Refer to Headset Mode for operation.
Related Features

Headset Mode

Headset Mode
All Digital Speakerphones have a standard 2.5 millimeter headset jack. When Headset Mode is selected (either by
pressing a preprogrammed headset feature key or dialing the Headset Mode code), the
activate/deactivate the headset.
While in Headset Mode, when the
with the headset active. When the
any call in progress.)
Related Features
Flexible Feature Button Programming
P7290 IMM
DX-80 I M
NSTALLATION AND
VOICE CALL xx
msg
CALLING STA 10
cbck msg
*
again to return to Voice Call Announce mode.
On/Off
button is pressed, the extension status changes to an off-hook condition
On/Off
button is pressed again, the extension status returns to idle (disconnecting
3-153
M
AINTENANCE ANUAL
Intercom - Non Blocking
On/Off
!9/
button is used to