Configuration; Voice Processing Modules - Comdial DX-80 Installation & Maintenance Manual

AAM (PN 7240) (Automated Attendant Module - 4 port, one menu for routing, 10 announcements for various
caller greetings) (installs into KSU1 only)
FL-4 (PN 7241) (Flash-based, 4-port Voice Mail with Auto Attendant, 1.5 hours storage and 100 mailboxes)
FL3HR (PN 7241E) (Flash-based Voice Mail storage expansion module adds 3 hours storage to the FL-4)
PC-8 (PN 7243) (Hard Drive-based, 8-port Voice Mail with Auto Attendant, 130 hours storage and 100
mailboxes)
The maximum system configuration is 16 CO lines, 56 extensions (48 digital and 8 analog) and 8 voice
processing channels.

Configuration

TM
The Comdial DX-80 platform is comprised of one full-featured key telephone model and two modular KSUs (Key
Service Unit). Several modules are available for enhanced system applications and configuration expandability.
KSU1 Components
n
CPM (Central Processor Module) with:
Two Serial Ports
Two Music Ports
One Control Contact (External Paging/LBC/Gate Control)
One External Page Equipment Interface Connection
Socket connectors for:
...KSU2(labeled "2
The CPM is installed inside of KSU1 to the 408M ribbon cable J4 (also labeled "To CPM")
n
Standard 408M (part of 7201) with:
4 CO Line Ports
1 Power Failure Transfer Port for the first CO line circuit
8 Digital Ports
Ribbon cable (J1, also labeled "COM4") for connection to the COM4 Module (PN 7210) in
KSU1
Ribbon cable sockets (J2 and J3, also labeled "To DPM8/APM4") for connection of DPM8
(PN 7220) or APM4 (PN 7230) modules.
n
Standard APM4 (part of 7201) with:
4 Analog Device Ports (installed on ribbon cable J5, also labeled "APM4")
KSU2 Components
n
Standard 408E (part of 7202) with:
4 CO Line Ports
1 Power Failure Transfer Port for the first CO line circuit
8 Digital Ports
Ribbon cable (J1, also labeled "COM4") for connection to the COM4 Module (PN 7210)
Ribbon cable sockets (J2 and J3, also labeled "To DPM8/APM4") for connection of DPM8
(PN 7220) or APM4 (PN 7230) modules.
Shielded cable (J4) for connection to CPM socket JP2 (also labeled "2

Voice Processing Modules

The DX-80 provides for several voice processing options. (Voice processors are commonly referred to as
Voice Mail systems. However this term is too generic to accurately describe the options available and how
they might be applied.) The optional Voice Processors that can be added to the DX-80 are fixed system
resources that do not require peripheral device ports (analog or digital). This significant advantage means
that the DX-80 VP options can be added to any DX-80 configuration without "port loss". (Most
P7290 IMM
DX-80 I
NSTALLATION AND
nd
Cabinet"), MDM, and VP modules (AAM, FL-4, and PC-8)
M M
AINTENANCE ANUAL
nd
Cabinet") in KSU1
1-2