Auxiliary Lamp / Led Status Bar - Comdial DX-80 Installation & Maintenance Manual

Related Programming
Extension - Line Assignment
CO Line - Tenant Group, CO Line Group
System Application - Numbering Plan 1 - CO Group, Numbering Plan 4 - CO Line Directory No.
Operation
icm co co gp
Note: [ ], [ ], [
operations. Use the three buttons below the LCD display to actuate the associated operation.
Setup
!95
1. Press
icm
2. Press [ ] to select Intercom dial tone as the appropriate operation when the handset is lifted.
co
3. Press [ ] to select a specific CO Line number to access when the handset is lifted. The system will prompt
you for the CO line directory number to select.
4. Input the valid CO line Directory Number (e.g., 740 for CO Line 1, 755 for CO line 16).
save
5. Press [ ].
co gp
6. Press [ ] to select a specific CO line group number to access when the handset is lifted. The system
will prompt you for the CO Line Group directory number to select.
7. Input the valid CO Line Group Directory Number (e.g., 9 for CO Line Group 1, 800 for CO Line Group 2, 806
for CO Line Group 8).
save
8. Press [ ].
9. You hear the confirmation tone when the selection is made after [
Operation
Lift the handset to access the selection.
Conditions
a) The system will not allow invalid directory numbers to be programmed during setup.
b) When a CO Line or CO Line Group is programmed for Automatic Selection that CO line or group must be
programmed as available for access by the extension in the system programming.
c) The feature code (
Default Setting
Default Setting: ICM
Programming Abstract
•
Program CO Line Group directory numbers as necessary.
•
Program CO Line directory numbers as necessary.
•
No specific programming is required to set up or operate Automatic Selection.

Auxiliary Lamp / LED Status Bar

Each Digital Speakerphone is equipped with a dual colored LED Auxiliary Lamp/LED Status Bar to assist users in
recognizing the extensions' status. The LED will operate and indicate active CO line ringing, Intercom ringing, Mute,
Message Waiting, Speakerphone/Headset Mode and Call Forward conditions.
P7290 IMM
DX-80 I
NSTALLATION AND
back next show
], [ ], [ ], [
. The display will show the current selection. ("ICM" = Intercom).
!95
) may be programmed under a flexible button on a Digital Speakerphone.
M M
AINTENANCE ANUAL
chg bksp save
], [ ], [ ], and [
save
] is pressed.
3-32
] are interactive LCD button