Comdial DX-80 Installation & Maintenance Manual page 325

PC-DBA Control Menu
At the bottom of the PC-DBA screen, special control functions of PC-DBA are shown. The following
line/bar can be found at the bottom of the display:
F1-Help F2-Unsave F3-RCV F4-SND F5-Cnt F6-Disc F7-Prn F8-Init F9-Mdm F10-
Use the associated "F" (Function) keys on the PC keyboard to access the various operations. The
functions and their specific operation are detailed in the text below.
F1 – Help
Press F1 to view the keystroke help menu of PC-DBA. There are two help screens.
F2 – A-Save/U-Save
This is a function of PC-DBA – Programming only and is described in Database Administration – Via PC-
DBA.
F3 – Receive
This is a function of PC-DBA – Programming only and is described in Database Administration – Via PC-
DBA.
F4 – Send
This is a function of PC-DBA – Programming only and is described in Database Administration – Via PC-
DBA.
F5 – Connect
Connecting to the DX-80 processor
Once a physical connection (cable or modem) has been made between the PC and the DX-80 system.
You must link the two devices using the F5-Connect function.
Press F5. If an adequate connection (straight-through serial cable or modem connection) exists between
the DX-80 system and the PC you will see the following Connect prompt:
Input the Database Administration Password. (At default this password is "_ _ _ _ _ _ _ _" (8 spaces).
Press the space bar eight times. When all eight password characters are input correctly, the connection
process will begin. If unsuccessful (wrong password or poor connection), the following error screen will
appear:
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
RS232C
+----------------------------+
¦ Connect
+----------------------------¦
¦ Please Input KSU Password: ¦
¦ ________
+----------------------------+
+----------------------------+
¦ Connect
+----------------------------¦
¦ Failure
¦ Press Any Key
+----------------------------+
4-9
M
ANUAL
¦
¦
¦
¦
¦