Co Line Group Directory Number Swapping - Comdial DX-80 Installation & Maintenance Manual

¢£¤¥
•
Use to highlight "CO Line." Then press
¢£¤¥
•
Use to highlight "Category 1." Then press
1 : [1/2]." The "[1/2]," indicates that this is the first of two pages for this database programming. Page 1
shows the programmable database items for CO Line ports 1-8 (CO Lines 740-747).)
³ ´
•
Use the and
¢£¤¥
•
Use to highlight the CO Group assignment for the appropriate CO Line. (CO Lines are listed
along the left side of the display.)
«
•
Press to change the data item value.
•
Input the appropriate CO Line Group number (1-8) then press
•
Continue programming other database items as required.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

CO Line Group Directory Number Swapping

Directory swapping is provided to further customize directory numbers to specific system resources within resource
categories. In this case, the Directory Numbers assigned to CO Line Groups in Flexible Numbering Plans can be
adjusted (if required) to meet the individual resource structure needs for the application.
For instance: the Directory Number for CO Line Group 1 is defaulted to "9" and the Directory Number for CO Line
Group 2 is defaulted to "800." These two Directory Numbers can be swapped using the Directory Number Swapping
utility if the operation is to access CO Line Group 2 using the directory number "9."
Programming Abstract
Use CO Line Group Directory Number Swapping to assign the directory number to a specific CO Line
Group.
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
P7290 IMM
DX-80 I
NSTALLATION AND
buttons on the PC keyboard to select the screen for the CO Line(s) to be programmed.
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
M M
AINTENANCE ANUAL
«
.
«
. (Notice the display header "CO Line Category
«
to store the data.
°
(escape) key to exit this database programming
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
3-69