Call Forward - Co Line Predefined (No Answer Condition) - Comdial DX-80 Installation & Maintenance Manual

Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Call Forward – CO Line Predefined (No Answer condition)
Incoming CO Lines can be designated to forward via a system timed setting to a predefined system resource. The
predefined forward destination can be an extension, UCD Group (includes Voice Mail and Hunt Groups) or Virtual
Number. One predefined location is available per CO Line regardless of status of ringing mode - Day, Evening,
Alternate or Timed. The line will forward to the predefined destination after the programmed CO Line Preset FWD
timer has expired.
Call Forward – CO Line Predefined is a No Answer condition forward.
Related Features
Call Forward – Extension
Call Forward - Extension – Predefined
Related Programming
CO Line - Line Type, Answering Position
Call Handling - CO Line Predefined CFW
Extension Application - Uniform Call Distribution
Extension - Line Assignment, Receive Assignment
Conditions
a) Call Forward - CO Line Predefined is a system programmed feature and will follow the programmed
conditions unless an extension call forward has been enabled and the timer for the extension call forwarding
is programmed at a shorter time than the Predefined timer.
b) Ringing at the "DAY" and "EVE" assigned locations continues until the CO Line has been answered.
c) When CO Lines are Call Forwarded – Predefined to the DX-80 Voice Mail system, special handling of the
ringing line occurs. The directory number of the CO Line (740-755) is sent to the VM system so that
automated attendant handling can be customized for the CO Line to be answered.
Default Settings
Call Handling – Predefined Forward Time = 10 seconds. (Range is 6-30 seconds in 2 sec. Increments.)
CO Line – Answering Position – Pre-CFW NoAns = "NULL" (no destination) for all CO lines. (Range is any
Extension, UCD, or Virtual directory number.)
Programming Abstract
•
Program the Predefined Forward Time for the amount of time that should elapse before CO lines are routed
to the Predefined destination.
•
Program the Predefined Forward destination for each CO line to be forwarded.
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
M M
AINTENANCE ANUAL
CO Line Answering Position
Uniform Call Distribution Groups
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
3-49