Intrusion - Extension/Co Line - Comdial DX-80 Installation & Maintenance Manual

Table of Contents

Advertisement

2.
You can:
a.
Lift the handset to speak confidentially with the calling extension.
b.
Press the Mute button to deactivate the Mute feature and speak with the calling extension hands-free.
(Using speakerphone mode.)
Operation – Receiving a Call in Tone Mode
1.
When your extension is idle, an intercom call to your extension will alert you of the call with a double-burst
tone which is repeated until you respond or until the call follows a Call Forward route.
2.
You can:
a. Lift the handset to speak confidentially with the calling extension.
On/Off
b. Press the
Conditions
a)
Intercom calls to Digital Speakerphones selected for Voice Announce - Hands-free or Voice Announce -
Private are "logically" answered by the system at the called extension.
b)
During Tone Ring, the red LED associated with the
c)
If a Flexible Feature Button has been programmed with the Intercom Mode Selection Code (
the LED associated to that button will indicate the current mode selection as follows:
Voice Announce – Hands-free, LED will light steady green.
Voice Announce – Privacy, LED will light steady red.
Tone Ringing Mode, LED will not light
Default Setting
All digital speakerphones are set to Voice Announce – Hands-free Reply mode.

Intrusion - Extension/CO Line

Intrusion allows the initiator to enter into an existing conversation when the initiator has been given the privilege to do
so via Extension programming ("Intrusion Active" = Y). This feature can be very effective for service observing and
any time that forcedly entering into a conversation on a CO Line or at another extension may be required.
Intrusion can be invoked both on a busy CO Line and to a busy extension.
Related Features
Monitor - Extension Via Monitor COS
Related Programming
Extension - Intrusion Active, Intrusion Accept, Intrusion Tone
Operation
1.
Press the busy CO Line button or dial a busy extension number.
Call to a busy extension, the display will show:
next
Press [
Access a busy CO Line, the display will show:
intru
2.
Press [
]. You are joined into the existing conversation.
P7290 IMM
DX-80 I
NSTALLATION AND
button to activate the speakerphone and speak with the calling extension hands-free.
EXT XXX
BUSY
cbck msg next
].
camp voic intru
CO LN BUSY XXX
cbck
intru
3-170
M
M
AINTENANCE
ANUAL
On/Off
button will flash.
!98
)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents