System Criteria And Capacity - Comdial DX-80 Installation & Maintenance Manual

System criteria and capacity:

Time Slots:
Customer Database memory protection
Ports:
CO/PBX/Centrex Lines
Digital Stations
Standard Single Line Telephones
DTMF Receivers:
DTMF Senders:
Tone Detectors: (Used to monitor call
progress tones; Busy Tone, Ring-back Tone,
etc.)
Contacts:
Conference circuits:
DISA circuits:
System Attendants:
Tenant Groups
UCD/Hunt Groups:
Members per group:
Group Types:
Hunting Method:
Voice Mail Groups:
Members (ports):
Integration Method:
VM Message Waiting:
VM Control codes:
CO Line Loop Current sensing:
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
PCM - 32 time slots x 4 Highways (128 voice
TDM 64 Time Slots (data processing)
300 hours via on-board lithium battery (no charging
required)
16
48
16 (Note: 32 total possible Digital extensions in this
configuration.)
One dedicated per single line telephone port.
Unlimited. (DTMF signal generation is derived from
the core system tone resource. Tone combinations
are available as needed.)
2 (Shared for advanced call processing system
features; DISA, ECF, ABR. etc.)
1 LBC can be programmed as associated to a CO
line or dialed by an extension to actuate the contact.
8 - 4 party conference circuits.
Any number of CO lines may be programmed for
DISA operation. (AAM required for operation.)
1Attendant + 1 Alternate per Tenant Group
3
24
24
UCD or Voice Announcer
Linear, All Ring or Distributed
1 per Tenant (uses 1 UCD Group per VM system)
24
Digital (ICD Voice) and In-band (for other)
#96 + station number to turn VM button LED on.
#*96 + station number to turn VM button LED off.
Disconnect Digit(s): 8 digits max.
Subscriber Calling via Intercom: 4 digits max.
Transfers to VM : 4 digits max.
Busy Forward: 4 digits max.
No Answer Forward: 4 digits max.
Direct Call Forward: 4 digits max.
CO Line Recall: 4 digits max.
CO Line Ringing: 4 digits max.
UCD Overflow: 4 digits max.
Record Digits for Voice Recorder function: 4 max.
Delete Digits: 4 digits max.
Suffix for transferred calls: 2 max.
Interrupt programmable from 50ms to 2500ms.
1-15
M
ANUAL
channels)