Comdial DX-80 Installation & Maintenance Manual page 260

show
•
Press [ ]. The DB Item Select screen displays.
To program Auto Log-Off and/or Log-On Again timers:
•
Input 08-05, then press [
chg
•
Press [ ] to change the Auto Log-Off timer until the appropriate time displays.
next
•
Press [ ] to advance to the Log-0n Again screen.
chg
•
Press [ ] to change the Log-On Again timer until the appropriate time displays.
To program settings for the built-in modem:
•
Input 04-15, then press [
show
•
Press [ ]. This advances to the Directory Number screen.
•
To change to the built-in modem directory number, press [
•
Input the appropriate directory number (must be a valid extension directory number as allocated in
System Application – Numbering Plan – Extension Directory Numbers).
«
•
Press to temporarily store this data.
Or...
next
•
Press [ ] to advance to the modem Baud Rate screen.
chg
•
Press [ ] until the appropriate baud rate displays.
• the Hold button
Press
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
To program Auto Log-Off and/or Log-On Again:
¢£¤¥
•
Use to highlight "System Application" and then press
¢£¤¥
•
Use to highlight "Category 1" and then press
¢£¤¥
•
Use to highlight the database item "PC-DBA Connection – Auto Log-Off/Log On Again" as
required.
«
•
Press until the appropriate value displays.
•
When all changes are made press the
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
P7290 IMM
DX-80 I
NSTALLATION AND
save
]. This advances to the Auto Log-Off programming screen.
save
]. This advances to the Built-in Modem programming screen.
to return to the previous menu level or press
°
(escape) key to exit this database programming screen. You will
3-210
M M
AINTENANCE ANUAL
chg
].
the Volume button (up or down)
«
.
«
.
«
.
to