Direct Station Selection Console - Comdial DX-80 Installation & Maintenance Manual

•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
Program DISA Line, COS, Service and/or Talk Time:
¢£¤¥
•
Use to highlight "DISA – Category 1." Then press
¢£¤¥
•
Use to highlight the database item that requires change.
«
•
Press until the appropriate value displays.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Direct Station Selection Console

The Direct Station (extension) Selection Console is a self-contained digital device that connects to an available DX-
80 digital port. The console provides one-button access to system resources for the extension to which it is
programmed to operate. The console has 48, dual-color LED buttons that can be programmed for system resources
that require visual interaction to properly administer the associated resource. There are also 12 buttons with no LED
for fast access to system resources that require no visual interaction.
The DSS Console occupies one DX-80 system digital port and therefore reduces the maximum system digital
extension capacity on a one-to-one basis for each DSS Console installed. The DX-80 system supports 12 maximum
DSS Consoles.
Related Features
Attendant/Extension DSS Console Button Programming
All system resources accessed via Directory Numbers
Related Programming
System Resource – DSS Allocation – DIR #
System Resource – DSS Allocation – DSS Owner
Feature Key Programming – DSS Set
Operation
When a DSS Console has been assigned to operate with your extension, use the feature buttons of the
console in the same way that the 30 programmable buttons of the telephone are used. Refer to each feature
description for specific operations.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
°
(escape) key to exit this database programming
3-109
M
ANUAL
«
.
Busy Lamp Field
Transfer