Mendota DXV-35 DEEP TIMBER II Installation & Operating Instructions Manual page 33

STEP 4:
Remove the rear plug plates and
gaskets as shown below. Save only Gasket
#65-02-00095 and Screws #50-01-00102.
Extra Screws are provided with this kit.
STEP 5:
Exhaust Collar #HA-30-00175 has
a high temperature rated fiberglass gasket ma-
terial installed on its flange face (see PAGE
29). It is critical that this gasket material be
seated properly to create an airtight seal. In-
stall all parts in the exact sequence as shown
below.
32