Top Flue Venting Components - Mendota DXV-35 DEEP TIMBER II Installation & Operating Instructions Manual

ITEM DESCRIPTION
1 12" VENT STACK
1 24" VENT STACK
1 36" VENT STACK
1 48" VENT STACK
2 90 º GALVANIZED ELBOW
3 45 º GALVANIZED ELBOW
4 ADJUSTABLE WALL THIMBLE
5 6" or 7" PIPE (Duravent 6"/Amerivent 7")
9 ATTIC INSULATION SHIELD 12"
10 ROOF FLASHING (0/12 TO 6/12)
10 ROOF FLASHING (7/12 TO 12/12)
11 STORM COLLAR
12 VERTICAL VENT CAP
13 SUPPORT BAND
14 HORIZONTAL VENT CAP
15 FIRESTOP SPACER
If adjustable-telescoping-pipe sections must be used, 1000º SILICATE STOVE MASONRY SEALANT
must be used on the inner pipe joints. See PAGE 9 for additional information.

TOP FLUE VENTING COMPONENTS

* NOTE: DO NOT SEPARATE TELESCOPING SECTIONS.
THEY MUST BE USED AS COMPLETE ASSEMBLIES.
Figure 5: Flue Venting Components
13