Mendota DXV-35 DEEP TIMBER II Installation & Operating Instructions Manual page 32

STEP 2:
Use an electric drill with a ¼" hex driver (with 6"
extension) to remove the screws and parts from the top of the
DXV-35 fireplace, as shown on left.
IMPORTANT
: Save Gaskets #65-02-00058 and 65-02-
00094 and screws # 50-01-00102 for use in STEP 2.
STEP 3:
Install all parts in sequence, as shown below. Start
by first reinstalling the TOP OUTER JACKET then the other
smaller components. It is of the utmost importance that
Gaskets 65-02-00094 and 65-02-00058 be installed exactly as
shown and properly seated to create a positive airtight seal.
WARNING:
Failure to create proper seals will result in
Carbon Monoxide emissions. Carbon Monoxide emission is
poisonous and will lead to health problems and can result in
death.
31