Replacing The Control/Options Boards - VKI Technologies Eccellenza cafe Service Manual

Replacing the Control/Options Boards

1. Switch the machine power off and disconnect the service cord.
2. Remove the top cover.
3. Remove the left side panel.
4. Remove the milk and chocolate powder dispensers.
5. Remove the wall behind the powder dispenser area.
a. Loosen the two upper screws.
b. Remove the two lower screws and the two side screws.
6. Disconnect all of the wiring harness connectors from the control board / options board
assembly. Also disconnect the ground wires from the tab on the control board heat sink.
August 5, 2013
Eccellenza Café – Service Manual
41