Functions Control And Procedure; Factory Settings Rear Control Board - VKI Technologies 145-3 Operating And Service Manual

FUNCTION CONTROLS AND PROCEDURES
FACTORY SETTINGS FOR REAR CONTROL BOARD FUNCTIONS
• •
BREW: Set at (-) mark to yield 10 cups (48 fl. oz./1.42 liter) in 2 minutes, 25 seconds ± 10
‚ ‚
BUZZER:
ƒ ƒ
TEMPERATURE:
„ „
AUTO BREW: Jumper is set to pins 1 & 2 to enable the AUTO BREW.
Page 10
seconds. Adjustment information is available on page 8.
Set at 7 mark, which is approximately 60 seconds. Adjustment information is
available on page 9.
Set at 9 mark to get 201-205°F. Adjustment information is available on page 7.
To disable AUTO BREW, set jumper to pins 2 & 3.
9703 T.S.S. MANUAL