VKI Technologies Eccellenza cafe Service Manual page 15

13. Once the cycle is completed, exit the rinse cycle mode by pressing on the
"Rinse Cycle" button inside the door, and remove the three empty bottles
from their supports.
14. Remove the silicone caps from their bath in the sanitizing solution and
thoroughly rinse them with potable water.
15. Install the clean caps onto new flavor bottles and install the bottles onto their
supports. You can now insert the respective tubing into each of the flavor bottles.
16. Fill a spray bottle with the sanitizing solution (2ml sanitizer per liter of
water).
17. Remove the cup stand, the carafe tray and their grills and thoroughly spray
each of them with clean sanitizing solution. Allow them to air dry – do not
rinse and do not wipe.
18. Thoroughly spray the spout support plate and pump spouts (at the
dispensing area) with the sanitizing solution. Allow it to air dry – do not rinse
and do not wipe.
19. Thoroughly spray sanitizing solution onto the door shelf and lower wall on the
inside of the door, as well as the complete dispensing area on the outside of
the door. Allow it to air dry – do not rinse and do not wipe.
NOTE: The flavor bottles used in the Eccellenza Café are disposable. They
should never be refilled and re-used – once empty, they should be replaced
with fresh bottles.
August 5, 2013
Eccellenza Café – Service Manual
15