VKI Technologies Eccellenza cafe Service Manual page 62

Eccellenza Café – Service Manual
4. Disconnect the two power wires from the inlet valve.
5. At the rear of the machine, remove the two screws securing the inlet valve to
the rear wall of the machine.
6. Remove the Oetiker clamp securing the tubing assembly to the inlet valve.
The valve can now be completely removed.
7. Secure the tubing assembly to the new inlet valve with a new Oetiker clamp.
8. Re-secure the inlet valve assembly to the rear of the machine with two
screws.
9. Reconnect the power wires to the valve.
10. Re-install the water tank valve cover.
11. Re-connect the water supply to the inlet valve.
12. Switch the machine power on – the water tank will start filling.
13. Check for leaks.
62
August 5, 2013