VKI Technologies Eccellenza cafe Service Manual page 26

Eccellenza Café – Service Manual
4. Insert the bottom of the spout support place into the slit on the front of the base.
5. While lifting the brewer, tilt the spout bracket upwards and to the back until it clears
the brewer spout. If done properly, the brewer spout will enter the hole on the spout
support plate and secure it in place.
6. Reconnect the powder and hot water hoses to the spout support.
7. Insert the flavor tubes (convoluted tubing) into the clip on the brewer.
8. Reconnect the brewer hose.
26
August 5, 2013