VKI Technologies Eccellenza cafe Service Manual page 48

Eccellenza Café – Service Manual
7. Remove the rubber selection button panel from the side of the LCD screen. The panel
is secured to the LCD screen support by an adhesive backing.
a. Lift a corner of the rubber selection panel until the adhesive peels from the
screen support.
b. Carefully peel the complete selection button panel from the screen support to
avoid leaving any adhesive behind.
8. Install the new rubber selection button panel onto the LCD screen support.
a. Peel the backing from the adhesive on the rear of the selection button panel.
b. Align the three tabs on the selection button panel with the three holes on the
LCD screen support.
c. Once aligned, press firmly on the selection button panel so that it sticks to the
LCD screen support.
48
August 5, 2013