VKI Technologies Eccellenza cafe Service Manual page 39

7. Remove the wiring at the top of the power supply by loosening the screws on the
terminal block enough to pull the wiring terminals off of the screws. Depending on
the model of Eccellenza Café, there may be either two or four wires to
remove.
8. From the outside of the machine, loosen the four screws that secure the power
supply to the rear wall of the machine.
9. From the inside of the machine, lift the power supply until the screws are clear of the
keyhole slots, and remove the power supply.
10. Install four screws onto the new power supply, but do not tighten them. There
should be enough clearance between the screw head and the power supply to clear
at least one thickness of sheet metal.
11. Install the new power supply to the rear wall by sliding the screws into the keyholes
slots. Tighten all four screws to secure the power supply to the rear wall.
August 5, 2013
Eccellenza Café – Service Manual
39