Replacing The Bean Grinder Capacitor - VKI Technologies Eccellenza cafe Service Manual

Eccellenza Café – Service Manual

Replacing the Bean Grinder Capacitor

1. With the power to the machine switched off, remove the machine top cover and
then the left side panel.
2. Remove the brewer assembly.
3. Remove the milk and hot chocolate powder dispensers.
4. Remove the powder area wall to gain access to the grinder capacitor.
5. Using a wrench or socket, remove the large hex nut securing the capacitor to the
wall at the brewer area.
6. Remove the old capacitor and disconnect the two wires from it.
7. Connect the two wires to the new capacitor.
8. Install the capacitor onto the wall and secure it with the large hex nut.
9. Re-install the powder wall and the two powder dispensers.
10. Re-install the brewer.
11. Re-install the left side panel and the top cover.
68
August 5, 2013