VKI Technologies Eccellenza cafe Service Manual page 71

Eccellenza Café – Service Manual
9. Install the new pump onto the two screws, making certain it is in the same direction
as the pump that was removed.
Note that the replacement flavor pump comes pre-assembled with the tubing
already installed; however, there is no colored tape on the tubing to help
identify which flavor pump it is, so you may want to add colored tape. Also
note the direction of flow of the pump, making certain not to reverse the two
tubes during installation.
10. Insert the pump inlet tube into its respective flavor bottle.
11. Connect the pump outlet tube onto its spout on the spout support bracket.
71
August 5, 2013