Removing And Installing The Spout Support Bracket - VKI Technologies Eccellenza cafe Service Manual

Eccellenza Café – Service Manual

Removing and Installing the Spout Support Bracket

1. Remove the flavor tubes (convoluted tubing) from the clip on the brewer.
2. While lifting the brewer slightly, press down on the top of the spout support plate
and pull it towards the front until it clears the brewer spout and can be removed.
3. To re-install the spout support bracket, insert the bottom of the bracket into the slit
on the front of the base.
18
August 5, 2013