Disassembling The Dual Valve Manifold - VKI Technologies Eccellenza cafe Service Manual

Eccellenza Café – Service Manual

Disassembling the Dual Valve Manifold

1. Remove the two black clips (top and bottom center clips) securing the two valves
together, and gently pull the two valves apart.
2. Remove the two clips securing the valve end cap to the valve body and gently
remove the end cap. There are two o-rings located between the valve body and the
end cap, and they must be replaced when re-assembling the valve.
3. Remove the two clips securing the valve inlet to the valve body and gently remove
the inlet. There is an o-ring located between the valve body and the inlet, and it
must be replaced when re-assembling the valve.
58
August 5, 2013