VKI Technologies Eccellenza cafe Service Manual page 76

Eccellenza Café – Service Manual
7. While pressing down on the locking clip at the front of the base, press down on
the clip at the rear of the base, and push it out through the front of the wall.
8. Disconnect the inline wiring connector that supplies power to the whipper motor.
9. Remove the base, gasket and impeller from the old motor and transfer it to the
new motor.
10. Install the new motor into the cutout in the machine wall. Install the bottom of
the assembly first, and then push the top of the assembly into the cutout until
the plastic clip locks it in place.
76
August 5, 2013