Marking All Areas Above Or Below A Set Temperature Level - FLIR ix Series User Manual

11 – Using the camera
11.10 Marking all areas above or below a set temperature
level
General
You can mark all areas above or below a set temperature level.
Procedure Follow this procedure:
28
1 Push the left selection button (Menu).
2 Use the navigation pad to select Measurement.
3 Push the left selection button (Select).
4 Use the navigation pad to select one of the following:
Detect above
■
Detect below
■
5 Push the left selection button (Select).
6 To change the temperature level above or below which you want to mark
the areas, use the navigation pad.
Publ. No. T559733_en-US Rev. a571 – ENGLISH (EN) – November 4, 2011