ABS disabling function (for Monster 795
This function disables the ABS control unit.
This operation must be carried out with the vehicle
stopped (key ON).
To disable the ABS control unit, access the menu on the
"DISAB ABS" page and hold down switch (1, fig. 10) in
position B "▼" for 3 seconds.
At the end of the 3 seconds, the flashing ABS light (10, fig.
4) on the instrument panel indicates the disabling.
From this moment, the ABS control unit is disabled; it is
automatically restarted at the next Key-Off / Key-On.
At the next Key-On the instrument panel indicates that it is
operative by keeping the ABS light (10, fig. 4) off.
If there are problems with the ABS system, the instrument
panel indicates its malfunction by keeping the ABS light (10,
fig. 4) on steady, the EOBD light (8, fig. 4) on steady and the
ABS error in the menu.
This indicator is activated only at a speed above or
equal to 10 km/h; at a speed lower than 10 km/h the ABS
control unit does not perform the diagnostics.