Jet Pump Support - Sea-doo SP Shop Manual

3 7 1
5
F07L0DA
GS, GSI, GSX, GTI AND GTX MODELS
4
2 6
F05J06A
HX MODEL

JET PUMP SUPPORT

GS, GSI, GSX, GTI, GTX, XP and HX Models
Removal
Remove jet pump. Refer to PROPULSION SYS-
TEM 08-02.
Remove inlet grate and riding plate.
Remove ball joint, boot, nut, half rings and O-rings
from steering cable.
Sub-Section 02 (ADJUSTMENT AND REPAIR)
8 2
4
6
3
5
1
www.SeaDooManuals.net
Section 11 HULL/BODY
F05K02A
TYPICAL
1. Unscrew nut
Remove ball joint, boot, nut, half rings and O-rings
from reverse cable (GTI and GTX models).
Remove boot and nut from VTS sliding shaft (XP,
GSI and GSX models).
Disconnect water supply hose, water return hose
and bailer hoses.
F05J0DA
TYPICAL — HX MODEL SHOWN
HX Model Only
Disconnect engine drain hose.
Disconnect engine exhaust hose.
1
11-02-19