9,10, Valve and Bellows
Pull the valve slightly. Using pliers, release the
clamp which retains the bellows.
Remove valve and bellows.
F01E21A
Loosen clamp to separate valve from bellows.
1
F01E24A
1. Clamp
Inspection
Inspect parts for damage. Verify especially bel-
lows for cracks.
Assembly
Assembly is essentially the reverse of disassem-
bly procedures.
www.SeaDooManuals.net
Section 04 COOLING SYSTEM
Sub-Section 02 (COMPONENTS)
04-02-9