Sea-doo SP Shop Manual page 97

SPX, XP, GSX and GTX Models
Disconnect water supply hose and water injection
hose at tuned pipe head.
1 2
F01D3YA
1. Water supply hose
2. Water injection hose
Loosen exhaust hose collar no. 1 at tuned pipe
cone outlet.
Remove clamp no. 4 securing tuned pipe cone to
tuned pipe head.
Remove screws no. 7 and nut no. 8 with flat
washers no. 9 at tuned pipe head flange.
F01D7IA
Remove retaining screw no. 23 of tuned pipe
head.
Sub-Section 08 (EXHAUST SYSTEM)
F01D76A
1. Screw
Remove tuned pipe head no. 10.
Remove both screws no. 6 retaining tuned pipe
cone to engine.
F01D7KA
F01D7LA
www.SeaDooManuals.net
Section 03 ENGINE
1
03-08-5