Sea-doo SP Shop Manual page 236

All Models Except the XP and HX
1, Large Clamp
Secure large clamp no. 1 as follows:
– Use pliers (P/N 295 000 069) as for removal.
– Manually engage holding hook in large window.
This is a pre-clamping position only.
F01J23A
PRE-CLAMPING POSITION
1. Holding hook
2. Large window
– Insert pointed tips of pliers first in closing
hooks.
F01J2BA
TYPICAL
1. Closing hooks
– Squeeze pliers. When both large and small win-
dows are directly over the 2 locking hooks,
press those windows down to engage hooks in
windows.
1
2
1
www.SeaDooManuals.net
Section 08 PROPULSION SYSTEM
Sub-Section 03 (DRIVE SYSTEM)
F02J0IA
1. Press to engage hooks in windows
NOTE: At installation, clamp tail should be in op-
posite direction of engine rotation.
F01J23B
1. Engine rotation (counterclockwise)
2. Tail in opposite direction
1
1
2
08-03-13