Sea-doo SP Shop Manual page 243

Section 08 PROPULSION SYSTEM
Sub-Section 04 (REVERSE SYSTEM)
F02J0FA
1. REVERSE position
If reverse gate needs to be readjusted, it can be
done at support with adjustment nuts. Turn cable
nuts to obtain position.
NOTE: If reverse gate adjustment is not done ad-
equately, performance and steering control will be
reduced at reverse position.
F02J06B
TYPICAL
1. Support
2. Adjustment nuts
08-04-6
Tighten adjustment nuts and recheck gate posi-
tion.
Reinstall vent tube.
Vent tube must be in place to provide proper
bilge ventilation.
1
F02L14A
1. Install vent tube
Reinstall storage tray.
1
2
www.SeaDooManuals.net
WARNING
1