Expired Password Or Inactive Password Messages; To Enter The User Password - Cisco Prisma II Hybrid Amplifier Installation Manual

Press the
3

Expired Password or Inactive Password Messages

After entering a valid password, you are authorized to make changes to system
parameters. As a security precaution, this authorization expires automatically 10
minutes after your last keystroke.
After your authorization to change system parameters expires:
If you try to change any system parameters, the menu displays Psw Expired.

If you try to disable the password, the menu displays Failed, Password Not

Active.
If either of these messages appears, you must re-enter the password as described in
To Enter the User Password (on page 71) to renew your authorization to change
system parameters.

To Enter the User Password

To use the user password feature, you must create and enter a password of exactly
eight digits using only the 0-9 number keys.
The password remains active for 10 minutes after your last keystroke. To change
configuration parameters after 10 minutes, you must re-enter your password.
Complete the following steps to enter a user password.
1 Access the Password menu as shown in To Access the Password Menu (on page
70).
2 Press the
3 When User Psw/Shift Off appears, press the
then enter the eight digits of your password, using the 0-9 number keys.
78-4025693-01 Rev D
key. The Password menu appears. User Psw is highlighted.
key. The user password menu appears.
ICIM Password
key to display Shift On, and
71