Table of Contents
Advertisement
Chapter 4 Operation Using ICIM
Yellow LED on
Ethernet connector
Green LED on
Ethernet connector
RS232 connector
ICIM2 LCD
The LCD on the front panel of the ICIM gives you a visual link to the ICIM
firmware. When the ICIM is installed and powered up, the MAIN menu appears on
the LCD.
The following illustration shows the ICIM MAIN menu.
68
Glows when the Ethernet port is operating in full duplex.
Blinks when collisions occur on the Ethernet port.
Glows when a link is established on the Ethernet port.
Blinks during data activity on the Ethernet port.
Used to connect a PC to the Prisma II system for CLI
communication and setup.
78-4025693-01 Rev D
Advertisement
Table of Contents
Troubleshooting
