Configuring The Module Using The Icim; To Configure Parameters Using The Icim - Cisco Prisma II Hybrid Amplifier Installation Manual

Configuring the Module using the ICIM

To Configure Parameters using the ICIM

You can use the ICIM to configure the parameters of this module.
1 From the MAIN menu, press the
2 Press the
Press the
3
Press the
4
5 Press the
6 To configure the module, press the
7 Press the
until you find the parameter of interest.
8 Press the
9 Press the
control.
10 Press the
78-4025693-01 Rev D
key to address the Shelf number. Then press the
key to scroll to the number of the desired shelf.
key. The Slot field is highlighted.
key or the
key. The MODULE menu appears on the ICIM LCD.
key or the
key to select the highlighted control.
key or the
key to save the changes and return to the MAIN menu.

Configuring the Module using the ICIM

key to highlight the Shelf and Slot fields.
keys to scroll to the number of the desired slot.
key.
key to scroll through the configurable controls
key to activate or change the value of the selected
key or the
81