Config Menus; Hybrid Amplifier Service Mode - Cisco Prisma II Hybrid Amplifier Installation Manual

Hybrid amplifier

Table of Contents

Chapter 4 Operation Using ICIM

CONFIG Menus

When the CONFIG menu is selected, the Shelf number field is highlighted. The

shelf and slot number fields may only be incremented with the

key. The

Up and Down arrows will scroll through the parameters that are specific to this

module.

Sample CONFIG menus are shown below.

Note: For details on all configurable parameters, see Module Parameter Descriptions

(on page 143).

Service mode allows the user to reduce the output power of the module to 15 dBm

so that the optical cable connections can be made without the risk of damaging the

optical components.

The Hybrid Amplifier has multiple optical outputs that are divided into two banks.

You can change the Service mode status on all banks of optical outputs using the

Service control.

It is critical that optical connections be modified only when the module is in Service

mode. The optical output power of the module in the normal operating mode can

damage the optical components if cable connections are altered.

key highlights the Slot number field. Once you exit the slot field, the

key or the

78-4025693-01 Rev D

Table of Contents

Prisma ii