To Restart The Icim Using Icim - Cisco Prisma II Hybrid Amplifier Installation Manual

To Restart the ICIM using ICIM

The boot selection dialog appears again.
For each of the following questions, you can press < Return > to select the
value shown in braces, or you can enter a new value.
How should the board boot?
1. pROBE+ (for debugging)
2. TFTP
3. Run ICIM Application
Which one do you want? [2] 3
1 Select 3 to indicate that the normal ICIM application should be run (instead of
TFTP). The summary page appears.
2 Do nothing and when the 5 second timeout expires, the ICIM restarts normally.
78-4025693-01 Rev D
(for code download)
Boot Dialog for ICIM/SNMP Configuration
101