Table of Contents
Advertisement
Chapter 4 Operation Using ICIM
Checking Alarms using the ICIM
To Check Alarms using the ICIM
Alarms fall into one of the following categories.
Major low
Minor low
Minor high
Major high
If the red ALARM LED on the front panel is blinking, a minor alarm condition is
indicated. If the ALARM LED on the front panel is illuminated, a major alarm
conditions is indicated.
1
From the MAIN menu, press the
Press the
2
3
Press the
Result: The Slot field is highlighted.
4
Press the
5
Press the
Result: The MODULE menu appears on the ICIM LCD.
6
Press the
Result: Module alarm conditions display.
7
Use the
desired alarm is displayed.
8
Monitor the alarm condition(s). Take appropriate action. Verify that all settings
and thresholds relating to the alarm indication are set correctly to rule out an
unintended alarm.
When finished, press the
9
84
key to address the Shelf number. Then press the
keys to scroll to the number of the desired shelf.
key.
key or the
key.
key.
key or the
key to highlight the Shelf and Slot fields.
key to scroll to the number of the desired slot.
key to scroll through alarm conditions until the
key to return to the MAIN menu.
key or the
78-4025693-01 Rev D
Advertisement
Table of Contents
Troubleshooting
