Cisco Prisma II Hybrid Amplifier Installation Manual page 67

MODID
20/05
20/06
20/06
20/13
20/13
SUCCESS!
*/* MODULE>
Note:
The information returned by the monitor argument includes units of

measurement.
InPwr values are stated to several decimal places, but only the first 2 or 3 are

significant.
Show Alarmstate
The following sample dialog shows the kind of information returned by the
alarmstate argument.
*/* MODULE> show alarmstate *pwr <Enter>
MODID
20/05
20/06
20/06
20/07
20/08
20/13
20/13
SUCCESS!
*/* MODULE>
Note: The information returned by the alarmstate argument provides both the
numeric value and its meaning.
Show Alarmparam
Alarms also have parameters, such as thresholds. Accordingly, the alarmparam
argument is in turn followed by an argument that specifies one of five parameters:
hysteresis, majorhigh, majorlow, minorhigh, and minorlow.
78-4025693-01 Rev D
NAME VALUE UNITS
OutPwr 8.29224 dBm
InPwr 5.91542 dBm
OutPwr 18.9929 dBm
InPwr 17.2202 dBm
OutPwr 19.4671 dBm
NAME STATE
OutPwr 0 (major low)
InPwr 0 (major low)
MaxInPwr 0 (ok)
OutPwr 2 (ok)
XSPwr 0 (ok)
OutPwr 0 (major low)
InPwr 0 (major low)
Module Commands
41