To View Active Module Alarms; Module Alarm Menus - Cisco Prisma II Hybrid Amplifier Installation Manual

To View Active Module Alarms

Module alarms are set at the factory and may not be adjusted by the user. Module
alarms represent a serious condition that has occurred in the system. If a module
alarm occurs, the module will stop operating until the alarm is cleared.

Module Alarm Menus

When a module ALARMS menu is selected, press the
scroll through alarms. Some typical ALARMS menus are shown below.
Note: For details on all alarm parameters, see Module Parameter Descriptions (on
page 143).
78-4025693-01 Rev D
Checking Alarms using the ICIM
key or the key to
87