To Check Alarm Thresholds; Alarm Threshold Menus - Cisco Prisma II Hybrid Amplifier Installation Manual

Chapter 4 Operation Using ICIM

To Check Alarm Thresholds

Complete the following steps to view alarm threshold factory default values.
1 At the MODULE menu, press the
menu.
2 Press the
3 When finished, press the

Alarm Threshold Menus

Some typical alarm threshold menus are shown below.
Note: For details on all alarm thresholds, see Module Parameter Descriptions (on
page 143).
86
key. The alarm thresholds previously set are displayed.
key to return to the MAIN menu.
key. The ICIM LCD displays the STATUS
78-4025693-01 Rev D