To Change The User Password - Cisco Prisma II Hybrid Amplifier Installation Manual

Chapter 4 Operation Using ICIM

To change a digit you have just typed, use the CAN (Cancel) function by
pressing the
4 Press the
whether your password entry was accepted.

If the password is accepted, the word Accepted appears in the menu, and
you are able to return to the MAIN menu.

If the password was rejected, the word Rejected appears in the menu.
Reasons for a password to be rejected include:
–
–
–
If the password is rejected, press the
menu and re-enter the password as described in step 3 above.

To Change the User Password

After entering a user password, you are authorized to change it as long as the
current password is active. If more than 10 minutes elapse since your last keystroke,
this authorization expires and you must re-enter the current password before
changing to a new one.
Complete the following steps to change the user password.
1 Access the Password menu as shown in To Access the Password Menu (on page
70).
2 Use the
3 Press the
4 When Change Psw /Shift Off appears, press the
and then enter the eight digits of your new password, using the 0-9 number keys.
72
key. This deletes the last digit typed.
key to enter the password. The ICIM display updates to show
Entering more than eight digits for the password.
Pressing keys other than the 0-9 number keys.
Entering an incorrect password if a valid password has been entered.
key to scroll down until Change Psw is highlighted.
key to select Change Psw.
key to return to the password
key to display Shift On,
78-4025693-01 Rev D