Operating The Icim; Using The Icim; Accessing The Icim Lcd Contrast; Icim Main Menu - Cisco Prisma II Hybrid Amplifier Installation Manual

Operating the ICIM

Using the ICIM

Once the module is installed, it runs without the aid of an operator. Unless alarms
are generated or your system configuration changes, you should not need to make
any adjustments to the module beyond the initial setup.

Accessing the ICIM LCD Contrast

To access the ICIM LCD contrast control from the MAIN menu, press the
Use the
Note: Do not hold down the ICIM key while adjusting the LCD contrast.

ICIM MAIN Menu

A few seconds after power-up, the MAIN menu appears. Press the
select the specific option.
Display
Offline
Modules
Alarms
Scroll
Module
Shelf
Slot
78-4025693-01 Rev D
key to increase or the
Description
Indicates TNCS or ROSA communication status with the ICIM.
Indicates the number of modules in the ICIM domain.
Displays the number of currently active alarms. Selecting this option
allows scrolling through all modules in alarm condition.
Allows scrolling through all modules in the ICIM domain.
Allows selection of any specific module in the ICIM domain.
key to decrease ICIM display contrast.

Operating the ICIM

key.
key to
75