Table of Contents
Advertisement
Hybrid Amplifier Description
The Prisma II optical network is an advanced transmission system designed to
optimize network architectures and increase reliability, scalability, and cost
effectiveness.
Hybrid Amplifier Features
The Prisma II Hybrid Amplifier has the following features:
Front panel green light emitting diode (LED) to indicate operating status
Front panel red LED to indicate alarm status
Optical input/output connectors
Hot-swappable and plug-and-play capability
Front panel optical output test point, -20 dB
Hybrid Amplifier Operation
Operating stand-alone or followed by post-amplifiers, this module provides high-
performance transmission of voice, video, and data signals for optical networking.
The module is controlled by an ICIM2, CLI, LCI, or SNMP software.
Hybrid Amplifier Optical Output
The module comes standard with SC/APC Duplex optical connectors. Optical
jumpers are sold separately to interconnect hybrid amplifier and post-amplifier
modules and to interconnect to other equipment that may have other optical
connector types.
Laser Warning
WARNING:
Avoid damage to your eyes! Do not look into any optical connector while the
system is active. Even if the unit is off, there may still be hazardous optical
levels present.
78-4025693-01 Rev D
Hybrid Amplifier Description
3
Advertisement
Table of Contents
Troubleshooting
