Configuring The Optical Amplifier Using The Icim - Cisco Prisma II Installation And Operation Manual

Configuring the Optical Amplifier Using the ICIM

Configuring Parameters
Using the ICIM, you can configure the parameters listed below. A list of configurable
parameters and CONFIG menus follow these steps.
Follow these steps to configure parameters.
1.
From the MAIN menu, press the
fields.
2.
Press the
the
3.
Press the
Result: The Slot field is highlighted.
4.
Press the
slot.
5.
Press the
Result: The MODULE menu appears on the ICIM.
6.
To configure the module, press the
7.
Press the
until you find the parameter of interest.
8.
Press the
9.
Press the
selected control.
10.
Press the
78-739260-01 Rev F
key to address the Shelf number. Then press the
SEL
key to scroll to the number of the desired shelf.
key.
ENTER
key or the

key.
ENTER
key or the


key to select the highlighted control.
SEL
key or the

key to save the changes and return to the MAIN menu.
ENTER
Operation Using the ICIM
key to highlight the Shelf and Slot

keys to scroll to the number of the desired
key.
CFG
key to scroll through the configurable controls
key to activate or change the value of the
key or

3-19