Other settings
Set the grinding degree
With the steplessly adjustable grinders you can adjust the WMF 1000 ideally to any type of
coffee. Changing the type of coffee can require resetting the grinding degree.
Use the multitool supplied in the accessories box!
>
Place the multitool into the grinding degree adjustment on the left side of the coffee machine.
>
Release coffee dispenser and wait until grinder starts up
•
Grinding should be finer: turn clockwise
•
Grinding should be coarser: turn anticlockwise
•
The grinding degree may only be set when the grinder is running.
•
Never adjust more than one rotation at a time.
•
Do not overwind the stop with force!
The factory setting of the grinding degree is designed for the qualities of average
coffee beans. When adjusting, there are the following limits:
Grinding degree too fine:
The dispensing stream is interrupted and/or flow fault
-> the ground coffee stops up the brewing filter.
Grinding degree too coarse:
Especially for espresso, the coffee flows too fast, the crème is too light and has too
little body, the aroma is flat.
Correct setting:
Check your setting by preparing a double shot of espresso. If the dispensing stream
is interrupted here or if the display indicates a flow fault, set the grinding degree at
least one turn coarser again.
Settings
Grinding degree
Grinding degree
See
See
Tips and tricks
Tips and tricks
31