Change The Water Filter - WMF 1000 User Manual

Care

Change the water filter

> Confirm with the
> Remove the old filter
> Insert a new filter
> Refill water tank
> After the change, confirm with the
38
> Place a 3 litre container under the hot water spout
> Start the filter rinse with the care button
When rinsing the filter, you will hear unusual noises. This is normal. The noises will end during the
filter rinse. During further operation, everything will sound normal again.
After the rinse, the readiness state display appears.
Depending on the water hardness and the water flow, but after 3 months at the
latest, the request appears to change the water filter.
The filter change can be put off with the Off/C button.
filter change filter change
OK:P OK:P brwse.:care-bt brwse.:care-bt
P button

pull water tank pull water tank
remove old filter remove old filter
insert new filter insert new filter
P button

filter rinsing filter rinsing
place 3L container place 3L container
under h.w. spout under h.w. spout
rinsing filter ... rinsing filter ...
time remain: 4 min. time remain: 4 min.
Your selection pls Your selection pls
24.10.2006 24.10.2006 08:15 08:15
Change water filter
See
"Commissioning" chapter